1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 010 1r5 2r2 3r3 4r7 6r8 100 150 220 330 470 680 101 4 5 5 5 5 5 6.3 5 6.3 5 0j 6.3 1a 10 1c 16 1e 25 1v 35 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 5 5 5 5 6.3 5 2.6 2.6 1.3 80 80 115 4 5 5 5 5 5 6.3 5 6.3 5 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 4 5 4 5 5 5 6.3 5 6.3 5 6.3 5 5.0 5.0 2.6 1.3 1.3 1.3 50 50 80 115 115 115 4 5 4 5 4 5 4 5 4 5 5 5 5 5 6.3 5 6.3 5 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 50 50 50 50 50 80 80 115 115 p 0.5 l +1 m a x 15 min 4 min d +0.5 max d d p d 4 1.5 0.45 6.3 2.5 0.45 5 2.0 0.45 sleeve ( p.e.t. ) (mm) aluminum electrolytic capacitors mf series 5mml, low impedance low impedance over wide temperature range of 55 to +105 c , with 5mm height. suited for dc-dc converters where smaller case size and lower impedance are required. compliant to the rohs directive (2002/95/ec). radial lead type dimensions type numbering system (example : 25v 10 f) u 1 m 2 f 3 1 4 e 5 1 6 0 7 0 8 m 9 d 10 d 11 configuration capacitance tolerance ( 20%) rated capacitance (10 f) rated voltage (25v) series name type d 4 to 6.3 pb-free leadwire pb-free pet sleeve dd configuration specifications category temperature range rated voltage range rated capacitance range rated capacitance tolerance leakage current tangent of loss angle (tan ) stability at low temperature endurance shelf life marking performance characteristics item 55 to +105 c 6.3 to 35v 1 to 100f 20% at 120hz, 20 c after 2 minutes' application of rated voltage, leakage current is not more than 0.01cv or 3 (a), whichever is greater. printed with white color letter on dark brown sleeve. the specifications listed at right shall be met when the capacitors are restored to 20 c after the rated voltage is applied for 1000 hours at 105 c. after storig the capacitors under no load at 105 c for 1000 hours and then performing voltage treatment based on jis c 5101-4 clause 4.1 at 20 c, they shall meet the specified values for the endurance characteristics listed above. mf mt rated voltage (v) tan (max.) z 25 c / z+20 c z 55 c / z+20 c rated voltage (v) impedance ratio zt / z20 (max.) 6.3 2 4 10 2 4 16 2 3 25 2 3 35 2 3 6.3 0.22 10 0.20 16 0.18 25 0.14 35 0.12 max. impedance ( ? ) at 20 c 100khz rated ripple current (marms) at 105 c 100khz case size d l (mm) impedance rated ripple cap.( f) code v low impedance measurement frequency : 120hz measurement frequency : 120hz, temperature : 20 c leakage current tan capacitance change within 20% of the initial capacitance value 200% or less than the initial specified value less than or equal to the initial specified value please refer to page 20, 21, 22 about the formed or taped product spec. please refer to page 4 for the minimum order quantity. frequency coefficient of rated ripple current coefficient frequency 50 hz 120 hz 300 hz 1 khz 10 khz or more 0.35 0.50 0.64 0.83 1.00 cat.8100y
|
